DAVIS GroWeather Console - Manual (Page 37)

Using the GroWeather
Page 30 GroWeather Manual
Selecting Units of Measure
To select the desired unit of measure and resolution, simply press UNITS while
viewing the wind speed or wind run displays. As you press UNITS, the
GroWeather cycles through the available units of measure.
S AMPLE U NITS OF M EASURE
High Wind Speed
The GroWeather displays the high wind speed along with the time and date at
which it occurred and the direction of the gust. For information on displaying
and clearing highs and lows, see “Highs and Lows” starting on page 45.
Clearing Daily Wind Run
You may reset the daily wind run total at any time to begin a new “daily” wind
run total.
1. Press WIND as necessary to display daily wind run.
2. Press and hold down CLEAR until the wind run total resets to zero.
D AILY W IND R UN C LEARED
Alarms
You may set a high alarm for wind speed. (See “Alarms” on page 47.)