DAVIS GroWeather Console - Manual (Page 39)

Using the GroWeather
Page 32 GroWeather Manual
5. To display the status of the AutoClear function for daily solar energy, press SUN again.
If the AutoClear function is enabled, the word On appears on the right of the
display. If the AutoClear function is disabled, the word OFF appears on the
right of the display. (See “Enabling/Disabling AutoClear” on page 51 for
instructions.)
6. Continuing to press SUN will cycle through the solar radiation displays in a continuous
loop.
Clearing Daily Solar Energy
You may clear the daily solar energy total at any time to begin a new “daily”
solar energy total.
1. Press SUN as necessary to display the daily solar energy total.
2. Press and hold down CLEAR until the daily solar energy total resets to zero.
D AILY S OLAR E NERGY C LEARED
R AINFALL
You may display daily rainfall and total rainfall. Whenever you view daily
rainfall, the rate of rainfall appears on the left of the display. In addition, you
may view the high rate of rainfall along with the time and date at which it
occurred. You may display rainfall in either inches (in) or millimeters (mm).
Rate of rainfall is displayed in inches per hour (in/hr) or millimeters per hour
(mm/hr).
Note: When viewing rainfall information, the compass rose does not appear on the left of the display.