DAVIS GroWeather Console - Manual (Page 47)

Using the GroWeather
Page 40 GroWeather Manual
2. To display leaf wetness, press DEW again.
Depending on which sensor you have selected, the display will either read
SOIL
or LEAF. If the display reads SOIL, you will need to press ENTER to select
the leaf wetness sensor. The word LEAF appears on the right of the display
and the leaf wetness reading (0-15) appears on the left. Pressing ENTER
again will select the soil temperature sensor. See “Viewing Air and Soil Tem-
perature, T-H Index, and Wind Chill” on page 25 for instructions on display-
ing the soil temperature reading.
SOIL AND L EAF W ETNESS D ISPLAYS
Selecting Units of Measure
To select the desired unit of measure, simply press UNITS while viewing the
current dew-point. As you press UNITS, the GroWeather alternates between
˚F and ˚C. All temperature and degree-day readings (including air tempera-
ture, soil temperature, T-H Index, and wind chill) appear in the unit of mea-
sure you select.
S AMPLE U NITS OF M EASURE
Alarms
You may set a special dew-point alarm which will alert you when temperature
comes within 2˚F (˚1C) of dew-point. (See “Setting the Dew-Point Alarm” on
page 50.)