DAVIS GroWeather Console - Manual (Page 31)

Using the GroWeather
Page 24 GroWeather Manual
6. To display the date on which the current period started and the number of days in the
period, press DEG DAYS again.
The date on which the period started appears on the right of the display. The
number of days in the period appears on the left of the display. (See “ Period
Display” on page 21.)
7. To display the status of the AutoClear function for degree-days (On/Off), press
DEG DAYS again.
If the AutoClear function is enabled, the word On appears on the right of the
display. If the AutoClear function is disabled, the word OFF appears on the
right of the display. (See “Enabling/Disabling AutoClear” on page 51 for
instructions.) The base threshold setting appears on the left of the display.
8. Continuing to press DEG DAYS will cycle through all the degree-days displays in a con-
tinuous loop.
Selecting Units of Measure
To select the desired units of measure for degree-days, simply press UNITS
while viewing any of the degree-days displays (except AutoClear or Period).
As you press UNITS, the GroWeather alternates between F and C. All
degree-day and temperature information (including air temperature, soil
temperature, T-H Index, wind chill, and dew-point) appears in the units of
measure you select.
S AMPLE D EGREE -D AYS U NITS OF M EASURE
Setting Thresholds
1. Press DEG DAYS as necessary to display either the base or the upper degree-days
threshold.
2. Use ENTER to set the threshold (see “Using the Enter Key” on page 17).
3. Press DEG DAYS to save the entry.