DAVIS GroWeather Console - Manual (Page 10)

Optional Accessories
GroWeather Manual Page 3
• GroWeatherLink Software
Logs data gathered by the GroWeather, downloads it to your PC, and
generates reports and graphical displays. Storage interval (1, 5, 10, 15, 30,
60, or 120 minutes) is set by the user. The data logger will store 16 hours
or 3, 7, 10, 21, 42, or 85 days worth of data depending on storage interval.
Windows
™ -compatible software enables you to analyze, plot, print, sort,
and summarize the data. Calculate, view, and print crop or pest-specific
degree-day totals. Automatically generates NOAA reports. Also
includes an advanced crop water management (ETc and irrigation) fea-
ture. Requires GroWeatherLink ET/Data Logger, Windows 3.1 or Win-
dows 95, and one free serial port.
• Sensor Mounting Arm
A single-location mounting option. The Sensor Mounting Arm includes
provisions for optimal mounting of all Davis sensors: anemometer, tem-
perature sensor (with Radiation Shield), Solar Radiation Sensor, Rain
Collector Shelf, etc.
• Radiation Shield
Protects the temperature sensor or temperature/humidity sensor from
solar radiation and other sources of radiated and reflected heat.
Increases the life of the sensor and the accuracy of the readings.
• Shelters
Two weather-resistant shelters enable you to mount some or all of your
system components outside. Optional heaters enable you to keep com-
ponents operating even in cold weather.
• Solar Power Kit
Powers the weather station using energy from the sun; no AC power is
required. Requires our 6.5-Amp-Hour Battery or other battery of your
choice.
• Alarm Output Module
Enables you to use weather station alarms to automatically start or stop
external devices such as irrigation systems, heaters, or fans.
• Surge Protectors
For upgraded protection against lightning-induced power surges,
power-cross conditions, and ground potential rises, use Surge Protec-
tors. Use one Surge Protector for every two wires and mount inside one
of our surge-protector shelters.