Alcatel Carrier Internetworking Solutions 6648 - Manual (Page 591)

OmniSwitch Troubleshooting Guide September 2005 page -205
Defaults
Platforms Supported
OmniSwitch 6624, 6648, 7700, 7800, 8800
Usage Guidelines
• You may enter more than one application ID in the command line. Separate each application ID with a
space.
• Application IDs may be entered in any order.
Examples
-> debug ktrace appid 254 level off
-> debug ktrace appid policy level info
-> debug ktrace appid policy snmp web aaa vlan level alert
-> debug ktrace no appid debug2
Release History
Release 5.1; command was introduced.
Related Commands
MIB Objects
N/A
parameter default
level info (6)
debug ktrace Enables or disables kTrace logging.
debug ktrace show Displays current kTrace parameters.
debug ktrace show log Displays kTrace log information.
debug systrace Enables or disables sysTrace logging.
debug systrace watch Enables or disables sysTrace log output to the console.
debug systrace appid level Adds or removes a sysTrace capture level for a specified subsystem.
debug systrace show Displays sysTrace debug log information.
debug systrace show log Displays the sysTrace log.
show log pmd Displays the contents of a stored Post Mortem Dump (PMD) file.