Alcatel Carrier Internetworking Solutions 6648 - Manual (Page 548)

page -162 OmniSwitch Troubleshooting Guide September 2005
debug vlan rule protocol-map
Displays the protocol map available. If a proprietary protocol type is configured on the switch that will
also display in the output of this command.
debug vlan rule protocol-map
Syntax Definitions
N/A
Defaults
N/A
Platforms Supported
OmniSwitch 6624, 6648, 7700, 7800, 8800
Usage Guidelines
N/A
Examples
-> debug vlan rule protocol-map
*** Protocol Indicator Map ***
proto = Ethernet II IP Frame = E-II PI = 0
proto = Ethernet II ARP Frame = E-II PI = 0
proto = Ethernet II RARP Frame = E-II PI = 0
proto = SNAP IP Frame = 802.3PI = 1
proto = SNAP ARP Frame = 802.3 PI = 1
proto = SNAP RARP Frame = 802.3 PI = 1
proto = IPX Ethernet II Frame = E-II PI = 4
proto = IPX Novell Frame = 802.3 PI = 3
proto = IPX LLC Frame = 802.3 PI = 2
proto = IPX SNAP Frame = 802.3 PI = 5
Release History
Release 5.1; command was introduced.
Related Commands
N/A