Alcatel Carrier Internetworking Solutions 6648 - Manual (Page 394)

page -8 OmniSwitch Troubleshooting Guide September 2005
ip dvmrp debug-level
Defines the level of debugging for DVMRP protocol on the switch.
ip dvmrp debug-level level
Syntax Definitions
level Specifies the DVMRP debug level (0–255). Higher debug-levels will
include all messages that correspond to a lower value. For example, a
debug level of 2 will display all messages for level 1 and level 2. As a
rule of thumb, higher levels will display more detailed messages; lower
levels will display more basic messages.
Defaults
Platforms Supported
OmniSwitch 7700, 7800, 8800
Usage Guidelines
When the debug level is set to 0, DVMRP debug logging is turned off.
Examples
-> ip dvmrp debug-level 2
Release History
Release 5.1; command was introduced.
Related Commands
MIB Objects
ALADVMRPDEBUGCONFIG
alaDvmrpDebugLevel
parameter default
level 1
ip dvmrp debug-type Enables or disables DVMRP debugging for a specified message
type, or for all message types.
show ip dvmrp debug Displays the current level of debugging for DVMRP protocol on the
switch, as well as the current DVMRP debugging status for all mes-
sages types.