Show ip rip debug – Alcatel Carrier Internetworking Solutions 6648 User Manual
Page 423
OmniSwitch Troubleshooting Guide
September 2005
page -37
show ip rip debug
Displays the current RIP debug levels and types.
show ip rip debug
Syntax Definitions
N/A
Defaults
N/A
Platforms Supported
OmniSwitch 6624, 6648, 7700, 7800, 8800
Usage Guidelines
N/A
Examples
-> show ip rip debug
Debug Level = 3
Types/Sections
error = on
warning = on
recv = on
send = on
rdb = on
age = on
config = on
redist = on
info = on
setup = on
time = on
Release History
Release 5.1; command was introduced.
output definitions
Debug Level
Debug level. The valid range 0–255. The default level is 0.
Types/Selections
The status of each debug type is shown here (on/off). See page
for
a description of debug types.