Alcatel Carrier Internetworking Solutions 6648 - Manual (Page 396)

page -10 OmniSwitch Troubleshooting Guide September 2005
Defaults
Platforms Supported
OmniSwitch 7700, 7800, 8800
Usage Guidelines
• Use the no form of the command to disable debugging for the specified item.
• Reminder: Debugging for a specified message type will only be enabled if its debug level is a value
greater than zero (i.e., 1–255). For information on specifying the debug level, refer to the
ip dvmrp debug-level command.
• The syntax all can be used to easily turn debugging for all message types on or off
(e.g., ip dvmrp debug-type all or no ip dvmrp debug-type all).
Examples
-> ip dvmrp debug-type all
-> ip dvmrp debug-type tm igmp flash
-> no ip dvmrp debug-type misc
-> no ip dvmrp debug-type all
Release History
Release 5.1; command was introduced.
Related Commands
MIB Objects
ALADVMRPDEBUGCONFIG
alaDvmrpDebugAll
alaDvmrpDebugError
alaDvmrpDebugFlash
alaDvmrpDebugGrafts
alaDvmrpDebugIgmp
alaDvmrpDebugInit
alaDvmrpDebugIpmrm
alaDvmrpDebugMip
alaDvmrpDebugNbr
alaDvmrpDebugProbes
alaDvmrpDebugPrunes
alaDvmrpDebugRoutes
alaDvmrpDebugTime
alaDvmrpDebugTm
parameter default
message_type error
ip dvmrp debug-level Defines the level of debugging for DVMRP protocol on the switch.
show ip dvmrp debug Displays the current level of debugging for DVMRP protocol, as
well as the current DVMRP debugging status for all message types.