Debug systrace show – Alcatel Carrier Internetworking Solutions 6648 User Manual
Page 565
OmniSwitch Troubleshooting Guide
September 2005
page -179
debug systrace show
Displays sysTrace debug log information (e.g., sysTrace status, Application IDs with non-default Severity
Level settings).
debug systrace show
Syntax Definitions
N/A
Defaults
N/A
Platforms Supported
OmniSwitch 6624, 6648, 7700, 7800, 8800
Usage Guidelines
N/A
Examples
-> debug systrace show
sysTrace is:
- INITIALIZED
- RUNNING
- configured to TRACE CALLERS
- configured to NOT WATCH on stdout
Only applications not at the level ‘info’ (6) are shown
Application ID
Level
--------------------------------------------------------
SNMP
(68)
debug 1
(7)
MIPGW
(70)
debug 1
(7)
SYSTEM
(75)
debug 3
(9)
Output fields are described here:
Release History
Release 5.1; command was introduced.
output definitions
Application ID
The Application ID (subsystem) for which the Severity Level is not set
to the info (6) default setting.
Level
The Severity Level of the above-referenced Application ID. Levels
include off (1), alarm (2), error (3), alert (4), warning (5), info (6),
debug1 (7), debug2 (8), and debug3 (9).