Alcatel Carrier Internetworking Solutions 6648 - Manual (Page 147)

Troubleshooting Group Mobility 6800 Group Mobility Troubleshooting
OmniSwitch Troubleshooting Guide September 2005 page 9-7
6800 Group Mobility Troubleshooting
The following commands and debugging functions are available for troubleshooting Group Mobility on
the NI. A summary is shown below.
• show vlan rules
• gmHelp
• gmcKiteDebug
• gmcShowPorts
• gmcShowRules
• gmnKiteDebug
• gmnKiteShowRules
• gmnMacVlanShowBuffer
show vlan rules
SW_2T19-> show vlan rules
Legend: type: * = binding rule
type vlan rule
-----------------+------+-------------------------------------------------------
ip-net 9 166.24.9.0, 255.255.255.0
ip-net 104 166.24.104.0, 255.255.248.0
ip-net 112 166.24.112.0, 255.255.248.0
dhcp-port 104 1/1
dhcp-port 104 1/2
dhcp-port 104 1/3
dhcp-port 104 1/4
gmHelp
Working: [Kernel]->gmHelp
***************************************************
Group Mobility Help for CMM
***************************************************
'gmcKiteDebug = 1' must be done in order to see the outputs on below debug
commands.
It also enables the real time debugger. To disable 'gmcKiteDebug = 0'.
gmcShowPorts ---------------Displays all the ports in the system
gmcShowMipTables -----------Displays all MIP tables used
gmcShowRules (GmcRuleType) -Displays all rules of specified type
gmcShowPiMap ---------------Displays Protocol Indicator Map
gmcShowConnections ---------Displays connections with all CMM interfaces
gmcShowNiConnections -------Displays connections with all NI interfaces
gmcMacVlanShowBuffer (int type) - If type=0, display macvlan_sw malloc counter only
- If type=1, display above and macvlan_sw table
gmcDebugKiteShowCML (int slot) -- Display CML setting at CMM