Alcatel Carrier Internetworking Solutions 6648 - Manual (Page 397)

OmniSwitch Troubleshooting Guide September 2005 page -11
show ip dvmrp debug
Displays the current level of debugging for DVMRP protocol on the switch, as well as the current
DVMRP debugging status for all messages types.
show ip dvmrp debug
Syntax Definitions
N/A
Defaults
N/A
Platforms Supported
OmniSwitch 7700, 7800, 8800
Usage Guidelines
• The administrative debugging status for message types displayed in the table are determined by the
ip dvmrp debug-type command.
• To configure debug levels, refer to the ip dvmrp debug-level command.
Examples
-> show ip dvmrp debug
Debug Level = 1,
Error = on,
Flash = off,
Grafts = off,
IGMP = off,
IPMRM = off,
Init = off,
MIP = off,
Misc = off
Nbr = on,
Probes = off,
Prunes = off,
Routes = on,
Time = off,
TM = off,
output definitions
Debug Level The current debug level value. For information on setting this parame-
ter, see the
ip dvmrp debug-level command on page B-8 .
error The current debugging status for DVMRP Error messages. Options
include on or off.
Flash The current debugging status for DVMRP Flash processing. Options
include on or off.