Alcatel Carrier Internetworking Solutions 6648 - Manual (Page 568)

page -182 OmniSwitch Troubleshooting Guide September 2005
Defaults
Platforms Supported
OmniSwitch 6624, 6648, 7700, 7800, 8800
Usage Guidelines
• You may enter more than one application ID in the command line. Separate each application ID with a
space.
• Application IDs may be entered in any order.
Examples
-> debug systrace appid 254 level off
-> debug systrace appid policy level info
-> debug systrace appid policy snmp web aaa vlan level alert
-> debug systrace no appid debug2
Release History
Release 5.1; command was introduced.
Related Commands
MIB Objects
N/A
parameter default
level info
debug ktrace Enables or disables kTrace logging.
debug ktrace appid level Adds or removes a kTrace capture level for a specified subsystem.
debug ktrace show Displays current kTrace parameters.
debug ktrace show log Displays kTrace log information.
debug systrace Enables or disables sysTrace logging.
debug systrace watch Enables or disables sysTrace log output to the console.
debug systrace show Displays sysTrace debug log information.
debug systrace show log Displays the sysTrace log.
show log pmd Displays the contents of a stored Post Mortem Dump (PMD) file.