Alcatel Carrier Internetworking Solutions 6648 - Manual (Page 518)

page -132 OmniSwitch Troubleshooting Guide September 2005
debug hre error
Enables/Disables error messages from Hardware Routing Engine (HRE) support software on a Chassis
Management Module (CMM) for a specific slot/slice.
debug hre error {enable | disable} slot/slice
Syntax Definitions
enable Enables error messages.
disable Disables error messages.
slot Specifies an NI slot number.
slice Specifies an NI slice (ASIC) number.
Platforms Supported
OmniSwitch 7700, 7800, 8800
Usage Guidelines
OS-66000 series does not have a HRE so this commands is not supported on these switches.
Examples
-> debug hre error enable 3/0
Release History
Release 5.1; command was introduced.
Related Commands
N/A