Alcatel Carrier Internetworking Solutions 6648 - Manual (Page 522)

page -136 OmniSwitch Troubleshooting Guide September 2005
debug hre cmm error
Enables/Disables error messages from Hardware Routing Engine (HRE) support software on a Chassis
Management Module (CMM).
debug hre cmm error {enable | disable}
Syntax Definitions
enable Enables warning messages.
disable Disables warning messages.
Platforms Supported
OmniSwitch 7700, 7800, 8800
Usage Guidelines
OS-66000 series does not have a HRE so this commands is not supported on these switches.
Examples
-> debug hre cmm error enable 3/0
Release History
Release 5.1; command was introduced.
Related Commands
N/A