Alcatel Carrier Internetworking Solutions 6648 - Manual (Page 418)

page -32 OmniSwitch Troubleshooting Guide September 2005
show ip pimsm debug
Displays the current PIM-SM debug levels and types.
show ip pimsm debug
Syntax Definitions
N/A
Defaults
N/A
Platforms Supported
OmniSwitch 7700, 7800, 8800
Usage Guidelines
The debug types displayed in the table are determined by the ip pimsm debug-type command on
page B-30 . To configure debug levels, refer to the ip pimsm debug-level command on page B-29 .
Examples
-> show ip pimsm debug
Debug Level = 1,
assert = off,
bootstrap = off,
crp = off,
error = off,
hello = off,
igmp = off,
init = off,
ipmrm = off,
joinprune = off,
mip = off,
misc = off,
nbr = off,
route = off,
spt = off,
time = off,
tm = off
output definitions
Debug Level The current debug level value. For information on setting this parame-
ter, see the
ip pimsm debug-level command on page B-29 .
assert The current state of messages related to assert metric.
Options include on or off.
bootstrap The current state of messages related to bootstrap.
Options include on or off.