Alcatel Carrier Internetworking Solutions 6648 - Manual (Page 519)

OmniSwitch Troubleshooting Guide September 2005 page -133
debug hre debug
Enables/Disables debug messages from Hardware Routing Engine (HRE) support software on a Chassis
Management Module (CMM) for a specific slot/slice.
debug hre debug {enable | disable} slot/slice
Syntax Definitions
enable Enables debug messages.
disable Disables debug messages.
slot Specifies an NI slot number.
slice Specifies an NI slice (ASIC) number.
Platforms Supported
OmniSwitch 7700, 7800, 8800
Usage Guidelines
OS-66000 series does not have a HRE so this commands is not supported on these switches.
Examples
-> debug hre debug enable 3/0
Release History
Release 5.1; command was introduced.
Related Commands
N/A