Alcatel Carrier Internetworking Solutions 6648 - Manual (Page 564)

page -178 OmniSwitch Troubleshooting Guide September 2005
debug systrace watch
Enables the sysTrace log on the console, or turns off (disables) the console display.
debug systrace watch {enable | disable}
Syntax Definitions
N/A
Defaults
Platforms Supported
OmniSwitch 6624, 6648, 7700, 7800, 8800
Usage Guidelines
N/A
Examples
-> debug systrace watch enable
-> debug systrace watch disable
Release History
Release 5.1; command was introduced.
Related Commands
MIB Objects
N/A
parameter default
enable | disable
debug ktrace Enables or disables kTrace logging.
debug ktrace appid level Adds or removes a kTrace capture level for a specified subsystem.
debug ktrace show Displays current kTrace parameters.
debug ktrace show log Displays kTrace log information.
debug systrace Enables or disables sysTrace Logging
debug systrace appid level Adds or removes a sysTrace capture level for a specified subsystem.
debug systrace show log Displays sysTrace debug log information.
show log pmd Displays the contents of a stored Post Mortem Dump (PMD) file.