HP Insight Management-Software - Manual (Page 31)

To disable this feature edit all Ethernet Networks to clear the Enable VLAN Tunneling property
check box, or edit all Server Profiles to ensure that no Ethernet Adapter Connections are using
Multiple Networks.
•
Network Access Groups are not supported.
Do not create Network Access Groups on the VC Domain other than the Default Network
Access Group (which is automatically defined by VC).
Figure 14 VC Domain with the Default Network Access Group plus another Network Access
Group configured.
To disable this feature, delete all Network Access Groups except the Default Network Access
Group. Ensure that all Ethernet Networks are associated with the Default Network Access
Group.
•
Port Throughput Statistics are not supported.
Do not enable the Port Throughput Statistics on the VC Domain. To disable this feature, go to
the VCM command line interface and execute the following command:
set statistics-throughput Enabled=false
•
Custom Module Host Name is not supported.
Do not set a custom Module Host Name for one or more VC modules.
Figure 15 VC module with custom Module Host Name
To disable this feature, go to the VCM user interface and check all VC modules to see if there
is a custom Module Host Name, then click on Reset in the row where the custom Module Host
Name is displayed.
Requirements for adding a VC Domain to a VC Domain Group 31