Raid concatenation dialog box – HP XP P9500 Storage User Manual
Page 294
Free LDEVs table contains the following items
Description
Item
The LDEV status icon, and the LDEV identifier (LDKC, CU, and LDEV numbers). If the selected
LDEV is a LUSE volume, the LDEV number of the top LDEV in the LUSE volume appears.
LDKC:CU:LDEV
The LDEV status icons indicate:
: Normal LDEV.
: Expanded (LUSE) volume
•
An LDEV number ending with # (for example, 00:00:01#) indicates that the LDEV is an
external volume. For details regarding external volumes, see the HP XP P9000 External
Storage for Open and Mainframe Systems User Guide.
•
An LDEV number ending with V (for example, 00:00:01V) indicates that the LDEV is a virtual
volume (V-VOL) for Fast Snap or Snapshot. For details regarding V-VOLs, see the HP XP
P9000 Fast Snap User Guide or the HP XP P9000 Snapshot User Guide.
The capacity of the LDEV.
Capacity
The RAID level of the LDEV. The RAID level is left unspecified with a hyphen (-) when the LDEV
is an external LU or virtual volume (V-VOL).
RAID
The data protection level on the LDEV.
Protection
•
SATA-W/V: Indicates the data protection level if the write and verify mode is set on a SATA
drive.
•
SATA-E: Indicates the data protection level if the Enhanced mode is set on a SATA drive.
•
Standard: Indicates that a SAS drive, SSD, external volume, or virtual volume (V-VOL) is
being used.
The parity group. If the LDEV extends over two or more parity groups, the PG column shows the
smaller parity group number.
PG
•
A parity group number starting with E (for example, E1-1) indicates that the parity group
consists of one or more external LUs.
•
A parity group number starting with V (for example, V1-1) indicates that the parity group
consists of one or more Fast Snap or Snapshot virtual volumes (V-VOLs).
The cache logical partition number. For detailed information about CLPRs, see the HP XP P9000
Cache Partition User Guide.
CLPR
The number of LDEVs selected in the Free LDEVs table.
Selected LDEVs
RAID Concatenation dialog box
Use this dialog box to view concatenated parity groups.
294 LUSE GUI reference