HP XP P9500 Storage - Manual (Page 263)

Selected LDEVs table
Description Item
The LDEV identifier, which is the combination of LDKC, CU, and LDEV. LDEV ID
The LDEV name, including the combination of prefix characters and the
initial number. LDEV Name
The parity group identifier. Parity Group ID
The pool name and pool identifier. Pool Name (ID)
The drive type and rpm in use on this LDEV. Drive Type/RPM
The RAID level. An asterisk "*" indicates that the parity group to which
the LDEV belongs is interleaved (concatenated). RAID Level
The emulation type. Emulation Type
The LDEV capacity. Capacity
The format type. Format Type
The storage system identifier in hexadecimal format. SSID
The cache logical partition number, displayed as ID:CLPR. CLPR
For detailed information about CLPRs, see the HP XP P9000 Cache Partition
User Guide.
The processor blade identifier. If Auto is selected, the ID is automatically
assigned. MP Blade ID
Indicates whether the LDEV is being used as the system disk. System Disk
• Yes: System disk.
•
No: Not system disk.
Indicates whether Smart Tiers or Smart Tiers Z is enabled or disabled. Smart Pool
• Enable: The LDEV is for Smart Tiers or Smart Tiers Z.
•
Disable: The LDEV is for Smart Tiers or Smart Tiers Z.
Create LDEVs wizard 263