HP Smart Update Manager - Manual (Page 51)

NOTE: HP SUM automatically opens the report after it finishes generating the report. If you
do not have the format associated to an application, HP SUM prompts you to save the report.
4. Click Generate.
Deleting a VM host
1. From the VM hosts screen, highlight the VM host.
2. Click Actions
→Delete.
3. Click, Yes, delete.
Using the iLO screen
The iLO screen displays only iLO nodes that you have added to HP SUM.
Adding an iLO
1. From the iLO screen, click Add Node.
2. The Add iLO procedure is the same as the Add Node procedure.
To add a node
1. From the Nodes screen, click Add Node.
Adding a single node by IP/DNS name
a. Select Add a single node by IP/DNS name.
b. Enter the IP address or DNS name.
c. Enter a description for the node.
d. In the Type field, select the node type. If you do not know the node type, select Unknown.
During the inventory process, HP SUM determines the node type.
NOTE: Selecting the correct node type might help HP SUM complete node inventory
faster.
Some nodes allow you to select the check box so that HP SUM automatically adds
Associated Devices. The associated devices identified varies based on the node type.
Select what you want HP SUM to do if it discovers updates already running on the node.
Some nodes select how you want HP SUM to progress if it detects an update process on
the remote node. Select one of the following:
•
Leave the update running and bypass the node
•
Stop any currently running update process on the node and replace it with updates
from this session
NOTE: If you select HP iLO Federation, enter the iLO Federation Group Name that is
assigned by HP iLO Federation. Use the username and password for the node IP address
you are adding.
HP SUM supports adding HP iLO Federation nodes. HP iLO Federation enables you to
manage multiple servers from one system running the iLO web interface. HP SUM supports
performing inventory on iLO Federation nodes.
For more information about HP iLO Federation, see HP iLO 4 User Guide.
e. If you want, select the baseline, additional package, or both to apply to this node.
Using the iLO screen 51