HP Smart Update Manager - Manual (Page 49)

NOTE: Select the check box if you want HP SUM to automatically add Associated
Devices. (Not available for all node types.)
•
HP SUM displays the currently selected baseline and additional package. Use the
drop-down menu if you want to change these.
NOTE: If you want to delete a baseline or additional package, the baseline or additional
package cannot be associated with a node. Associate a new baseline or delete the node
to delete a baseline.
•
Credentials
•
OS Management Options – None, Use SNMP, Agentless Management Service, Use
WBEM
•
Reboot Options – Reboot system, Reboot delay, Reboot message
•
Installation Options – Downgrade or rewrite versions
•
Force Options – Show firmware or software updates
3. Click OK to accept the changes and return to the Nodes screen.
Aborting a VM host update
1. From the VM hosts screen, highlight the VM host whose updates you want to cancel.
2. Click Actions
→Abort.
VM hosts inventory
1. From the VM hosts screen, highlight the VM host you want to take inventory.
2. Click Actions
→Inventory.
3. The VM host Inventory procedure is the same as the Node Inventory procedure.
To inventory a node
1. From the Nodes screen, highlight the node and then click Actions
→Inventory.
2. Select a baseline, additional package, or both to apply to the node.
3. Click Inventory.
Deploying a VM host
1. From the VM hosts screen, highlight the VM host you want to deploy.
2. Click Actions
→Review/Deploy.
3. The VM host Deploy procedure is the same as the Node Deploy procedure.
To deploy a node
1. From the Nodes screen, select a node to update, and then click Actions
→Review/Deploy.
2. If you want to change installation options, click Installation Options and then select from the
following:
•
Downgrade: This allows you to downgrade all of the components in the node to an older
firmware version without clicking Force for each component in the baseline library list.
•
Rewrite: This allows you to rewrite the current firmware version to components in the node
without clicking Force for each component in the baseline library list.
Using the VM Hosts screen 49