Job storage limit, To set the job storage limit, Job held timeout – HP Color LaserJet 5500 Printer series User Manual

Page 47: To set the job held timeout, 37 job held timeout

Changing printer control panel configuration settings

By using the printer control panel, you can make changes to general printer configuration
default settings such as tray size and type, PowerSave Time, printer personality (language),
and jam recovery.

The printer control panel can also be accessed from a computer by using the setting page of
the embedded Web server. The computer shows the same information that the control panel
shows. For more information, see

Using the embedded Web server

CAUTION

Configuration settings seldom need to be changed. Hewlett-Packard recommends

that only the system administrator change configuration settings.

Job storage limit

This option sets the limit for the maximum number of jobs stored on the hard disk at the
printer. The maximum number allowed is 100, and the default value is 32.

Note

This option is only available if a hard disk is installed.

To set the job storage limit

1. Press

to enter the MENUS.

2. Press

to highlight CONFIGURE DEVICE.

3. Press

to select CONFIGURE DEVICE.

4. Press

to highlight SYSTEM SETUP.

5. Press

to select SYSTEM SETUP.

6. Press

to select JOB STORAGE LIMIT.

7. Press

to change the value.

8. Press

to set the value.

9. Press

AUSE

ESUME

Job held timeout

This option sets the period of time that the system keeps files in job storage before deleting
them from the queue. The default setting for this option is OFF; the other available settings
are 1 HOUR, 4 HOURS, 1 DAY, and 1 WEEK.