HP Color LaserJet 5500 Printer series User Manual
Page 138
Control panel message
Description
Recommended action
Rotating...
belt drive
To exit press
Cancel Job key
The printer is executing a Component
Test and the component selected is
Belt Only.
Press
C
ANCEL
J
OB
when ready to stop this test.
Rotating...
fuser motor
To exit press
Cancel Job key
The printer is executing a Component
Test and the component selected is
fuser motor.
Press
C
ANCEL
J
OB
when ready to stop this test.
Rotating...
transfer motors
To exit press
Cancel Job key
The printer is executing a Component
Test and the component selected is
TRANSFER MOTORS.
Press
C
ANCEL
J
OB
when ready to stop this test.
Rotating
Scanner
To exit press
Cancel Job key
A Scanner Test is in progress.
Press
C
ANCEL
J
OB
when ready to stop this test.
Saving current state
The current state is being saved.
No action necessary.
Setting saved
A menu selection has been saved.
No action necessary.
Test terminated
A diagnostic test has been
terminated by pressing the
C
ANCEL
J
OB
button.
No action necessary.
TRAY X CONTAINS
UNKNOWN MEDIA
The paper type in the specified tray
cannot be determined.
1.
To change paper type, press . Use
and
to highlight the type, then press
to select.
2.
To change the paper size to Letter, A4,
Executive, B5 JIS, A5, or Legal, leave the
tray switch in the Standard position.
3.
To change the paper size to other sizes,
move the tray switch to Custom, adjust the
paper guides against the paper, and close
the tray.
4.
Use
and
to highlight the paper size,
then press
to select.
TRAY X EMPTY
Ready
For menus press
The specified tray is empty and
needs to be filled, but the current
job does not need this tray to print
correctly.
Refill the tray at a convenient time.
TRAY X OPEN
For help press
alternates with
Ready
For menus press
The specified tray is open or not
closed completely. This tray is not
needed for the current print job.
Close the tray.
128
Chapter 8 Problemsolving
EN_WW