HP Color LaserJet 5500 Printer series User Manual
Page 139
Control panel message
Description
Recommended action
TRAY X
Size detected by tray
TRAY X
To change type
press
The printer is reporting the current
configuration of Tray X. The tray
switch is in the Standard position.
1.
To change paper type, press .
2.
Use
and
to highlight the type, then
press
to select the type.
or
To change the paper size to Letter, A4,
Executive, B5 JIS, A5, or Legal, leave the tray
switch in the Standard position.
or
1.
To change the paper size to other sizes,
move the tray switch to Custom, adjust the
paper guides against the paper, and close
the tray.
2.
Use
and
to highlight the paper size,
then press
to select the size.
TRAY X
Size specified by user
TRAY X
To change type
press
The printer is reporting the current
configuration of Tray X. The tray
switch is in the Custom position.
1.
To change paper type, press .
2.
Use
and
to highlight the type, then
press
to select the type.
3.
To change the paper size to Letter, A4,
Executive, B5 JIS, A5, or Legal, leave the
tray switch in the Standard position.
4.
To change the paper size to other sizes,
adjust the paper guides against the paper,
and close the tray.
5.
Select the paper handling menu from the
control panel. Configure the size for the
tray.
6.
See
for more
details.
Unable to mopy job
A Mopy job cannot be mopied
because of a memory, disk, or
configuration problem. Only one
copy will be produced.
No action necessary.
Unable to store job
A job cannot be stored because of
a memory, disk, or configuration
problem.
Install additional memory in the printer, or
install a disk drive into the printer. If a disk drive
is installed, delete previously stored print jobs.
USE INSTEAD?
TRAY X:
The printer is offering a selection of
alternate paper to use for the print
job.
1.
Use
and
to highlight another tray, and
then press
to select the tray.
2.
Press
to return to the previous tray.
Validating supplies
For menus press
alternates with
Ready
For menus press
A new cartridge has been
installed and the printer is
determining whether it is an
HP or non-HP cartridge.
No action necessary.
Wait for printer to
reinitialize
Settings have been changed before
the printer automatically restarts,
or external device modes have
changed.
No action necessary.
EN_WW
Control panel messages
129