HP Integrity rx4610 Server User Manual

Page 83

Chapter 8: Server Management

8. Close the plastic latching mechanism that secures the end of the board nearest the front of the

chassis.

9. Install the non-hot plug PCI adapter board cover by aligning the slotted hinge into the chassis

housing, closing the cover, and securing the cover screw.

10. Close the rear part of the top cover and secure it by tightening the two thumbscrews in the

back.

11. Attach any peripherals to the rear panel of the Legacy I/O board.

12. Install the power cords to the system.

13. Push the system into the equipment rack.

14. Power-on the system.

15. Turn on all peripheral devices connected to the system that you shut down during this

procedure.