HP Identity Driven Manager Software Series User Manual

Page 72

3-8

Using Identity Driven Manager
Configuring Locations

Figure 3-4. New Device window

Enter the Device to be added using the

Device Selection pull-downs, or

select the

Manually enter device address option.

Using the

Device Selection

option:

Select a device group using the pull-down menu. This will enable the

Select Device

pull-down menu in the next field.

Select a device from the pull-down list of available devices. The list
is populated with the IP address or DNS name for all (PCM managed)
devices in the selected group.

Using the

Manually enter device address

option:

Click the check box to enable the data entry field below it.

Type in the IP address or DNS name of the device to be added.

N o t e :

If PMM is licensed, this dialog will not show wireless device. You must add
wireless devices from the "Wireless Devices" tab on the "New Location Dialog"

If PMM is not licensed, wireless devices will appear in this dialog. However,
you will not be able to select any ports, the only option will be "Any port"

This manual is related to the following products:

Identity Driven Manager Software Licenses