HP Identity Driven Manager Software Series - Manual (Page 158)

4-18
Using the Secure Access Wizard
Using Secure Access Wizard
N o t e : If you had previously configured other RADIUS servers for authentication
with the device, that information will be over-written by the Secure Access
Wizard. The SAW will attempt to remove enough currently configured
RADIUS servers to “make room” for the ones configured in the SAW. So,
if you already have three RADIUS servers configured on a device, and then
the you configure two new RADIUS servers via the SAW, when the settings
are applied the SAW will remove the first two servers from the device
configuration.
19. Click Next to continue to the RADIUS Server Shared Secret window.
Figure 4-15. Secure Access Wizard, RADIUS Shared secret display
20. If you want to use the same RADIUS shared secret (password) for all the
selected devices, click the
Use for all devices
check box.
Enter the
RADIUS shared secret
to be used for access authentication.
Re-enter the shared secret in the
Confirm shared secret
field.