HP Identity Driven Manager Software Series - Manual (Page 149)

4-9
Using the Secure Access Wizard
Using Secure Access Wizard
Figure 4-7. Secure Access Wizard, WLAN Selection example
13. Click the check box for each SSID (WLAN) to which the secure access
settings will be applied. (A check mark indicates the SSID is selected)
Click the check box for the device to apply secure access settings to all
SSIDs on the device.
14. Click
Next
to continue to the authentication configuration window:
• For 802.1X, go to step 12 (below).
• For Web-Auth, go to step 13.
• For MAC-Auth, go to step 14.
15. The 802.1X configuration window lets you select the authentication
method to be applied in the secure access settings for the selected devices.