HP Identity Driven Manager Software Series - Manual (Page 145)

4-5
Using the Secure Access Wizard
Using Secure Access Wizard
4. Click Next to continue to the next window.
5. If you selected one or more AP530 wireless devices, the 530 Group
Configuration Check Step window appears and displays information
about each selected AP530 that supports the group configuration feature.
One AP530 will be selected as the Master device and will be the only AP530
configured. (The group configuration feature propagates the new settings
from the Master device to the other AP530s, including those with group
configuration disabled.)
Ensure the correct device is selected as the Master device and click Next.
Or, to select another device as the Master device, check the
Master device
checkbox next to the desired device.
Figure 4-3. Secure Access Wizard, 530 Group Configuration example
6. Click Next to continue to the Authentication Method Selection window.
The Authentication Method Selection window lists the selected devices,
and the authentication methods that can be used on each device. It lists
the device name, model and software version installed. The device listing
can be sorted according to device model, name, software version, or
authentication method.
Authentication method support varies from device to device and between
firmware versions. For example, some devices support two authentica-
tion methods per port while some devices only support one. For devices