HP Identity Driven Manager Software Series - Manual (Page 144)

4-4
Using the Secure Access Wizard
Using Secure Access Wizard
2. Click Next to continue to the Device Selection window.
N o t e : If you do not have a licensed copy of the ProCurve Mobility Manager software
and there are wireless devices discovered by PCM, the Excluded Devices
window displays, with the list of devices, model, and installed switch software
version. Use the Device Capabilities link to determine if you can upgrade the
device software to a version that will support the secure access settings.
.
Figure 4-2. Secure Access Wizard, Device Selection example
3. The
Available Devices
list is populated with all discovered ProCurve devices
that support use of 801.X Authentication. You can filter the list to display
devices for one device group (model) by selecting the device group from
the pull-down menu.
Select a device (or devices) in the Available devices list, then click >> to
move it to the
Selected Devices
list.
Ti p : To begin, ProCurve recommends that you select only one or two devices,
and then save the security access settings as a template that can be applied
for other devices of the same type.