HP Identity Driven Manager Software Series User Manual
Page 148
4-8
Using the Secure Access Wizard
Using Secure Access Wizard
When the desired ports are selected, click
OK to validate and save your
selections.
10. To manually enter port numbers, in the
Port to secure
field, type the ports
to which the secure access settings will apply.
Enter any combination of single port numbers and port ranges separated
by commas. For example, type A1,A3-A5,A7 to apply the access settings
on ports A1, A3, A4, A5, and A7.
The port entries are validated, and if any entry is invalid a text message
indicating the error appears below the data entry fields for the device.
The
Ports that will not be secured
field contains a read-only list of the ports
excluded from the secure access settings. These typically include inter-
switch ports, ports with an authentication method already configured, and
ports connected to devices (such as printers) that do not support network
access.
You can click the
Reset
to clear all data, and auto-populate the “
Ports to
secure
:" field with ports on the device that can be secured. Ports that are
excluded will appear in the "
Ports that will not be secured"
field.
Repeat the process for each device listed in the window. For a long list of
devices, a scroll bar lets you move down the list as needed.
11. Click
Next to continue. The next window display will vary based on the
devices and authentication methods selected.
•
If you selected a wireless device, the WLAN selection window dis-
plays, as described in step 9.
•
If you selected only wired devices, the authentication configuration
window displays.
–
For 802.1X, go to step 12.
–
For Web-Auth, go to step 13.
–
For MAC-Auth, go to step 14.
12. The WLAN selection window displays the list of Wireless devices you
selected. Click a device to expand the list to show the WLANs (SSIDs)
configured on the device.