HP Identity Driven Manager Software Series - Manual (Page 153)

4-13
Using the Secure Access Wizard
Using Secure Access Wizard
a. Click the radio button to select the RADIUS authentication protocol.
Only one method can be applied, either:
–
Use PAP-capable RADIUS server for Web-Auth
– Use CHAP-capable RADIUS server for Web-Auth
b. Click the Advanced Settings for Wired Web-Auth to configure the
advanced settings for Web-Auth on wired devices. (see figure 4-11 on
the next page)
c. Click the check box to select the setting to configure, then enter the
parameter to be applied.
When a parameter is configured, the Reset to default values option is
enabled. Click the link to restore the advanced settings for wired Web-
Auth defaults.
Figure 4-11. Secure Access Wizard, Advanced Wired Web-Auth
Advanced Web-Auth settings for wired devices include: