HP NonStop G-Series - Manual (Page 79)

Appendix B: Sample InstInfo File 79
• OCC_DIST01_Collector
The default event source (collector) for OCC filter. The default is $0.
• OCC_DIST01_Filter
The name of the OCC filter file being used for filter - ... You can define
maximum three filters. The default is ZTFLTRO filter.
• OCC_DIST01_CPU
CPU on which the distributor (DIST01) process will run.
• OCC_DIST01_Priority
The priority of the distributor process.
• OCC_DIST01_Name
Name of the distributor.
• OCC_DIST01_ProcessName
Name of the distributor process.
NOTE: OVNM supports up to 20 Distributors for the monitoring (OCC) portion of OVNM. These
distributors are used to determine which events will be checked against the EMS thresholds that are defined
using the OCC. There are 6 parameters per distributor numbered from 01 to 20 (must be a 2-digit number).
• Mail_Option
To enable or disable e-mail feature. Can have a value of Yes or No.
• Email_Trace
To configure tracing. Options available are Error, None and Progress. Error is the default value.
• Email_LogSent
This is used to configure OVNM to generate EMS messages for every Email that is sent. This can have a
value of Yes or No.
• Email_LogFail
This is used to configure OVNM to generate EMS messages every time an error is returned when an Email
is sent. This can have a value of Yes or No.
• Email_LogGiveUp
This is used to configure OVNM to generate EMS messages whenever an email will be removed from the
queue because the GiveUpMin interval has been exceeded. This can have a value of Yes or No.
• Email_QreadIntervalSec
How often the host application is to pick up queued mails. Specify a value between 1 – 36000 seconds.
The default value is 30 seconds.
• Email_RetryIntervalSec
The duration in seconds after which the host application will retry for failed mails. Specify a value between
1 – 36000 seconds. The default value is 300 seconds.
• Email_GiveUpMin
The duration after which the host application will stop trying to send the e-mail and delete it from the queue.
The default value is 120 minutes and you can specify a value in the range 1-600.
• Sender_ID
The sender e-mail ID. Sender ID is the ID you want associated as the sender of the emails generated by
OVNM.
• Email_Port
The port used by the e-mail server. The default value is 25.
• Tandem_Email_Ip
The IP address of the NonStop server.
• Email_Server_Ip
The IP address of the mail server.
• Use_Default_Templates
Specify to use standard or custom EMS template. Can have a value of Yes or No.
A
pp
en
di
x B