HP NonStop G-Series - Manual (Page 77)

Appendix B: Sample InstInfo File 77
• Product
Specify the name of the product as OVNM.
• WorkSubvol
Specify the name of the work subvolume. This field is created when a node is added using the Add to
Workstation field in the Host Installation Client.
• Install_Subvolume
The subvolume where OVNM is to be installed.
• TCPIP_process_name
The name of the TCPIP process that will be used to communicate between the NonStop and the external
servers for the OCC, ObjectMap, HPOM, etc.
• Home_terminal
A physical hometerm or a process that can become the home terminal for OVNM. This process should be
continuously available. The default value is $VHS.
• Process_prefix
A two-character prefix that will be used as the first two characters for all the OVNM processes, making
them unique. The first character must be a letter, and both characters must be alphanumeric.
• OCC_port
TCP/IP port for OCC. It should be a valid and unused port number on the system. The number should be
between 1025 and 10000. The default value is 5020.
• OVNM_port
TCP/IP port for OVNM, which is used to communicate with Operations Manager. It should be a valid and
unused port number on the system. The number should be between 1025 and 10000. The default value is
5030.
• License_key
The license key provided by HP.
• Guardian_user
The user ID that owns the OVNM environment.
• Preconfig
For selecting the pre-configured thresholds. Can have a value of Yes or No. If the value Yes is specified,
then OVNM will be installed with default policies.
• Only_OVNM_Events
For specifying that only OVNM events are to be sent to Operations Manager/Console. Can have a value
of Yes or No.
• NNM
To specify if NNM is also installed. Can have a value of Yes or No. Yes specifies that NNM is installed on
the workstation. If NNM is not installed, the value is specified as No.
• Highpin
To run the gateway processes in Highpin. Can have a value of ON or OFF.
• ICE_Option
To enable the monitoring of the ICE subsystem. Can have a value of Yes or No.
• FileSys
To generate alerts if a file does not exists or when a threshold is violated. Can have a value of Yes or No.
• Base24_Option
To enable the monitoring of the BASE24 objects. Can have a value of Yes or No.
• AliveMsgInt
The time interval (in minutes) after which Host components send an Alive message to the front-end. By
default the value is 0.
• FirstTaclPrompt
This is used to tell the HIC when to expect the first prompt from the Tacl process. This designates the Tacl
prompt number and will typically be 1.
A
pp
en
di
x B