HP NonStop G-Series - Manual (Page 21)

OVNM Host Installation Client 21
• Delete From Both
This option can be used to completely remove a configuration from the front-end as well as the backend.
The OVNM Host Installation Client confirmation box is displayed.
Figure 2-13 OVNM Host Installation Client Confirmation Box
Click the Yes button to delete the selected Host configuration, else click the No button.
After removing OVNM from the HP NonStop Server, you should also clean up the lines of code that were added
to the TACLCSTM file for the User ID that was used to start OVNM. The lines of TACL code will be surrounded by
comments that are inserted by the Install TACL macro.
NOTE: Make sure that the OVNM Agents on the HP NonStop Server and the workstation are not running
when you use the Delete options. Use the Stop Agent button in the OVNM Host Management Client to stop
OVNM agents on the HP NonStop Server. To stop the OVNM agents on the workstation, use Start 
Programs  HP OVNM  Management Server Tools  Stop Agent option.