HP NonStop G-Series - Manual (Page 109)

Appendix G: Transporting Thresholds 109
AutoRpt (Auto Maintenance Report)
The AutoRpt program generates a simple report showing what thresholds are defined with auto maintenance.
To run AutoRpt, switch to the OVNM subvolume and run it. For example:
3> volume $oss.OVNM
4> run autorpt / in ormconf [, out ] /
The program will open the ORMCONF file and produce a report showing all the thresholds that have the auto
maintenance option defined. The report will print a ‘section’ for each threshold. Each section will start with a line
that displays Subsystem Name/Object Type/Threshold Name. The next line will contain the values that were
specified for object and manager. The third line contains the type of auto maintenance (Rebuild or Update). The
fourth and fifth lines show the schedule for the auto maintenance. The time will be displayed followed by Yes/No
values for each day of the week or the relative interval.
The following is an example. The CPU threshold will perform auto maintenance at 4:00 AM on Saturdays and
Sundays. The DISK threshold will do it at 6:00 AM on Mondays, Wednesdays and the weekend. The
Pathway/TCP threshold will follow the same schedule. Auto maintenance for the threshold to make sure Pathmon
processes are still active will be executed every hour.
4> Volume $oss.OVNM
5> run autorpt / in ormconf /
CPU/CPU/CPU IS DOWN
*
Maint: Rebuild...
Absolute: 04:00 M T W T F S S
ExclHoliday=N N N N N N Y Y
DISK/DISK/DISK IS DOWN
*
Maint: Update(addonly)...
Absolute: 06:00 M T W T F S S
ExclHoliday=N Y N Y N N Y Y
PATHWAY/TCP/TCP IS NOT STARTED
*
Maint: Update(addonly)...
Absolute: 06:00 M T W T F S S
ExclHoliday=N Y N Y N N Y Y
PROCESS/OBJECT/PROCESS IS DOWN
$*/$SYSTEM.SYS*.PATHMON
Maint: Update(addonly)...
Relative Interval: 01 hours.
Number of AutoMaintained Configs: 000000004