HP Designjet 700 Printer series User Manual
Page 92
All menu modes
Default: Normal
Device setup
Drying time
3-22
Company confidential. Postillo/755CM User’s Guide Final Freeze Status:Frozen
This is the cyan on page 3-22 (seq: 90)
This is the black on page 3-22 (seq: 90)
To Adjust Drying Time
You can make a global adjustment to the printer’s automatic drying times through
the front-panel menus.
Drying time
in front panel
Result
None*
None (printer cuts page without delay).
Less
Adjusted for the driest expected environmental
conditions.
Normal
As in the table on page 3-21.
More
Adjusted for the most humid expected environmental
conditions.
* Not
recommended if you are using roll media and leaving the printer unattended, as the ink
may smear when the pages are dropped into the media bin.
So if you are operating your printer in an extremely dry environment, choose
Less
;
in an extremely humid environment, choose
More
. For environmental
specifications, see page 11-4.
IMPORTANT.
Adjusting drying times purely to speed up the printer is not recommended as the
quality of your print can be impaired.
Working with Media and Cartridges
Unloading Media