HP Designjet 700 Printer series - Manual (Page 85)

3-15
Company confidential. Postillo/755CM User’s Guide Final Freeze Status:Frozen
This is the cyan on page 3-15 (seq: 83)
This is the black on page 3-15 (seq: 83)
14
SELECT MEDIA
Coated paper
Enter
↓
↑
Use the
↑
and
↓
keys until the display shows the type of media you are
loading 1 , and then press the Enter key.
If you are using software that offers a “special print mode” for this printer,
then simply press
Enter on the first media type displayed (whatever it is), as in
this case it is the software that controls the print mode, not the printer. For
more details on special print modes, see page 3-6.
0014
15 a When the front panel instructs you, lift the media lever.
b Take hold of the edge(s) of the media now extending from the exit slot
and pull the media toward you until taut. Then align the left and right
edges of the media, so that they are flush with the edges of the roll.
c When the front panel instructs you, lower the media lever.
A
B
0018
1 For advice on media types, see page 3-2.
Working with Media and Cartridges
Loading Media
MEDIA
AND
CAR
TRIDGES
3