HP Designjet 700 Printer series - Manual (Page 169)

9-13
Company confidential. Postillo/755CM User’s Guide Final Freeze Status:Frozen
This is the cyan on page 9-13 (seq: 167)
This is the black on page 9-13 (seq: 167)
If the Entire Image Is in One Quadrant of the Correct Printing
Area
Is the page size configured in the software too small?
Are you sure that your software doesn’t believe the drawing to be in one quad-
rant of the page?
Otherwise, this indicates an incompatibility between the software and the printer:
Is your software configured for this printer? For general advice, see page 1-32.
For advice specific to your software, see either the documentation supplied with
the driver or any Software Application Notes supplied with your printer.
If you still haven’t found the solution, try changing the printer’s Graphics
Language setting on the front panel ( Device setup / Lang ).
If the Image Is Unexpectedly Rotated
Check the front-panel Page format / Rotate setting. See page 4-8.
For non-PostScript files: if Queueing and Nesting are both ON, pages may be
automatically rotated to save media. See page 6-10.
For an explanation of rotation for PostScript files, see page 4-10.
If the Print Is a Mirror Image of Your Drawing
Check the front-panel Page format / Mirror setting.
If the Print Is Inaccurate
If you notice problems with accuracy, print the Service Config print, as
explained on page 7-5, to see if the printer needs to be recalibrated.
This is the magenta on page 9-13 (seq: 167)
TROUBLE- SHOOTING
9
Troubleshooting
Solving Problems with Image Position or Content