HP Designjet 700 Printer series - Manual (Page 163)

9-7
Company confidential. Postillo/755CM User’s Guide Final Freeze Status:Frozen
This is the cyan on page 9-7 (seq: 161)
This is the black on page 9-7 (seq: 161)
Solving Print-Cartridge Problems
If the Access Cartridges Key Does Not Work
Make sure the window is closed before you press Access Cartridges .
If the Printer Runs the Cartridge-Alignment Routine
Unexpectedly
The printer runs the automatic cartridge alignment procedure every time you
load, replace or even reseat a cartridge, whether it is a new cartridge or not. Do
not remove the cartridges unnecessarily.
You can stop the alignment by pressing Cancel , but the printer will restart the
alignment procedure the next time you try to switch it on.
If Brand New Cartridges Have Problems
Check the cartridges to be sure you have removed the protective nozzle tape.
Try reseating cartridges.
Don’t forget that, after you remove or reseat a cartridge, the printer will run its
automatic cartridge alignment procedure – see page 3-26.
For troubleshooting other problems with the print cartridges, see the section
starting on page 9-16.
This is the magenta on page 9-7 (seq: 161)
!
TROUBLE- SHOOTING
9
Troubleshooting
Solving Print-Cartridge Problems