HP Designjet 700 Printer series - Manual (Page 166)

9-10
Company confidential. Postillo/755CM User’s Guide Final Freeze Status:Frozen
This is the cyan on page 9-10 (seq: 164)
This is the black on page 9-10 (seq: 164)
Solving Problems with Image Position or Content
If you don’t find the solution to the problem here, other sources of help are:
The documentation supplied with the driver that you are using to manage the
output from your software application to the printer. For example, the online
and printed documentation included in the following drivers supplied with your
printer:
– HP DesignJet PostScript Drivers for Macintosh
– HP DesignJet PostScript Driver for Microsoft Windows
– HP Driver for Microsoft Windows
– HP Printer Drivers for AutoCAD
The documentation supplied with your application software
If the Print Is Completely Blank
Check the print cartridges to be sure you have removed the protective nozzle
tape from all of them. Do not forget that, after you remove or reseat a cartridge,
the printer will run its automatic cartridge alignment procedure – see page 3-26.
Cartridges may be out of ink. For an explanation of how to check if a cartridge
is out of ink, see page 3-25.
If the front-panel graphics language setting is Automatic (the default), try the
other settings ( PostScript for a PostScript file, HP-GL/2 for an HP-GL/2 file
etc.) and send the file again. See page 7-7.
Troubleshooting
Solving Problems With Image Position or Content