HP Designjet 700 Printer series - Manual (Page 108)

Full menu mode
Default: 0
Affects next file sent
Stays after power off
Page format
Rotate
4-8
Company confidential. Postillo/755CM User’s Guide Final Freeze Status:Frozen
This is the cyan on page 4-8 (seq: 106)
This is the black on page 4-8 (seq: 106)
Rotating a Drawing
Rotating a Drawing from the Front Panel
Your Drawings can only be rotated from the Page format / Rotate option in the
front panel if:
Queueing and Nesting are off (see page 6-9), and if
the file is either a PostScript file or contains no raster data.
If you are using the non-PostScript Microsoft Windows driver supplied with this
printer, your files do contain raster data and therefore you cannot use this
Rotate
option. The normal line drawings of most CAD software do not contain raster
data, and therefore you can use this
Rotate option.
To Rotate a Drawing from the Front Panel
Except in the circumstances stated above, you can rotate a drawing from the
printer’s front panel, without changing the drawing in your software. The options
are 90, 180 or 270 degrees relative to the drawing’s orientation in your software.
The rotation is counterclockwise, as shown below.
0 _ 90 _ 180 _ 270 _
Controlling the Page Format
Rotating a Drawing