HP Designjet 700 Printer series - Manual (Page 107)

Full menu mode
Default: Normal
Affects next file
Page format
Margins
PS
4-7
Company confidential. Postillo/755CM User’s Guide Final Freeze Status:Frozen
This is the cyan on page 4-7 (seq: 105)
This is the black on page 4-7 (seq: 105)
Adjusting the Margins (Roll Media Only)
Besides nesting and setting the page size, you can also change the margin settings
and expand the printing area of the page, therefore reducing the amount of media
waste. The two side margins are 5.0 mm. By automatic setting of the printer’s
margin is 17 mm on the leading and trailing edges of the media. By reducing the
margins to 10 mm on the leading and trailing edges of the media, you can use
14 mm more printing area along that axis. The adjustment is available in the front
panel.
With PostScript files, the margins are always “ Norma l”.
5.0 mm 5.0 mm
17.0 mm
17.0 mm
5.0 mm
10 mm
10 mm
Smaller Normal
Leading edge
Trailing edge
5 mm = 0.2 in
10 mm = 0.4 in
17 mm = 0.67 in
0024
Margins and Automatic Cutting
IMPORTANT. When Margins is set to Smaller, the printer waits for the print to dry and the next
file to begin printing before cutting the page from the roll. If you press Form Feed
and Cut , the printer immediately cuts off the current page. When the next file
begins, the printer cuts again to give this page the narrow margin.
P
AGE
FORMA
T
4
PS
Controlling the Page Format
Adjusting the Margins (Roll Media Only)