HP Designjet 700 Printer series - Manual (Page 91)

3-21
Company confidential. Postillo/755CM User’s Guide Final Freeze Status:Frozen
This is the cyan on page 3-21 (seq: 89)
This is the black on page 3-21 (seq: 89)
Unloading Media
Drying Time
On some media types, the ink needs to dry before the media is unloaded. For roll
media, the printer automatically allows the appropriate drying time before cutting
the page and dropping it into the media bin. For sheet media, you should wait for
the times shown in the table below before unloading the media.
Typical Drying Times (minutes)
Print Quality
Media Type on the
Front-Panel Display
Fast Normal
or Best
Coated paper 0 0.25
Coated heavy paper 0 0.25
Matte film 2.0
Clear film 2.0
High-gloss photo Not
recommended
4.0
Semi-gloss photo
recommended
4.0
High-gloss film 2.0
Opaque bond 0.5 1.0
Translucent bond 0.5 1.0
Natural Tracing paper 0.5 1.0
Vellum 1.0 4.0
In the table above you will see that some media types can be unloaded
immediately.
Working with Media and Cartridges
Unloading Media
MEDIA
AND
CAR
TRIDGES
3