Factory, Security level, Figure 58 security level screen – HP StorageWorks MSL6000 Tape Library User Manual

Page 72: Inserting and removing tape cartridges, 58 security level screen

Operation

NOTE:

The Vertical Calibration button is only available on four-drive models.

Factory

The Factory menu options are intended for use by factory personnel only.

CAUTION:

Unauthorized use of the Factory option could render the library inoperable.

Security Level

Selecting this option lets you select passwords for a security level (see

NOTE:

The library ships with a default Service password of 5566.

NOTE:

Setting a value 0000 for a given level disables that level.

Figure 58

Security level screen

Inserting and Removing Tape Cartridges

Unless you are using the mail slot(s), a tape magazine must be removed from the library to remove

or insert tape cartridges. Make sure the slot you want to use is not already reserved for a tape

cartridge or cleaning cartridge that is now in a tape drive. The safest way to do this is to unload all

tape drives before removing a magazine. You can unload all the tape drives either through your

host system software or by using the

LOAD/UNLOAD

command from the Library Option menu.