HP StorageWorks MSL6000 Tape Library - Manual (Page 125)

MSL6000 series tape library user guide 125
5014 Drive Already Loaded
(Cleaning operation failed because the
drive already has a cartridge inserted.)
• Press the Enter button to clear the
message.
• Invalid user initiated operation. Set
parameters correctly and try again.
• If the tape in the drive is not in use,
unload the drive and retry the cleaning
operation.
5015 Expired Clean'g Cart
(Cleaning operation failed due to an
expired cleaning cartridge.)
• Press the Enter button to clear the
message.
• Remove expired cleaning cartridge from
library and discard. Replace with new
cleaning cartridge.
5016 Not a Clean'g Cart
(Cleaning operation failed because the
loaded cartridge is not a cleaning
cartridge.)
• Press the Enter button to clear the
message.
• Make sure tape in reserved slot is a
cleaning cartridge.
• Invalid user initiated operation. Set
parameters correctly and try again.
5035 Drive Timeout Error
(Cleaning operation failed because the
drive timed out.)
• Press the Enter button to clear the
message.
• Invalid user initiated operation. Set
parameters correctly and try again.
• Ensure the drive shows good status
through the drive status window.
503B Move Command Fail
(A front panel move operation failed.) • Press the Enter button to clear the
message.
• Invalid user initiated operation. Set
parameters correctly and try again.
503C Clean Operation Timeout
(Cleaning operation failed because the
drive timed out.)
• Press the Enter button to clear the
message.
• Invalid user initiated operation. Set
parameters correctly and try again.
• Ensure the drive shows good status
through the drive status window.
Table 10 Fault Symptom Codes (continued)
FSC Message ERP