HP StorageWorks MSL6000 Tape Library - Manual (Page 127)

MSL6000 series tape library user guide 127
7002 Control command execution failed • Press the Enter button to reboot.
• Cycle power to the library or reboot
using the GUI touch screen.
7003 Control response not matched to a known
command
• Press the Enter button to reboot.
• Cycle power to the library or reboot
using the GUI touch screen.
7004 Loader response not matched to a known
command
• Press the Enter button to reboot.
• Cycle power to the library or reboot
using the GUI touch screen.
7005 Drive response not matched to a known
command
• Press the Enter button to reboot.
• Cycle power to the library or reboot
using the GUI touch screen.
7006 Flash response not matched to a known
command
• Press the Enter button to reboot.
• Cycle power to the library or reboot
using the GUI touch screen.
7007 Drive index on Update Status message
was invalid
• Press the Enter button to reboot.
• Cycle power to the library or reboot
using the GUI touch screen.
• Ensure the drive shows good status
through the drive status window.
7008 The Drive response was not as expected • Press the Enter button to reboot.
• Cycle power to the library or reboot
using the GUI touch screen.
• Ensure the drive shows good status
through the drive status window.
7009 The opcode for a WORD message was
unknown
• Press the Enter button to reboot.
• Cycle power to the library or reboot
using the GUI touch screen.
700A The opcode for a DWORD message was
unknown
• Press the Enter button to reboot.
• Cycle power to the library or reboot
using the GUI touch screen.
700B The button causing library to go offline
was unknown
(A command to take the library off-line
was completed successfully, but the GUI
button that initiated the action could not
be identified.)
• Press the Enter button clear the
message.
• Cycle power to the library or reboot
using the GUI touch screen.
Table 10 Fault Symptom Codes (continued)
FSC Message ERP